top of page

BOS Wire Rope Lubrication Systems

Corelube - wire rope lubrication BOS systems

The BOS Heavy Oil Wire Rope Lubrication Systems are designed to apply wire rope lubricants from light oils up to a soft grease.

Wire rope lubrication on board a Woods Hole ship
ROV cable lubrication operation
Wire rope lubrication operation

The BOS wire rope lubrication systems have the capability of applying LIGHT, MEDIUM & HEAVY cable lubricant coatings.

The coating thickness is easily adjusted with our new pump control systems.

Cabel lubrication operation

5 Collar Sizes Available.

Cable Size Range: 1.0mm to

The Newest Innovation in EM Cable & Wire Rope Lubrication Systems  

1100 Collar

wire rope lubrication 1100-BOS collar

Patent Pending

1100-BOS Collar, Fits ​​Cable sizes from:
0.04" (1.0mm) to 0.625" (15.9mm)

2100 Collar

Corelube - wire rope lubricator 2100-BOS collar
  • The BOS wire rope lubrication systems are extremely strong, lightweight & easy to use.

  • The guide bushings/scrapers remove surface contaminants from the wire rope before being lubricated.

  • The guide bushings snap into place quickly without tools. There are no bolts or metal plates, reducing any damage to the wire rope.

  • Each guide bushing is machined to the diameter of the wire rope for maximum life & surface cleaning.

  • BOS spiral brushes fit a wide range of cable diameters.

  • Wire rope deformities can be run through the collar.

  • Wire ropes can be run through the collar in either direction and at any angle.

  • Wire ropes can run through the collar at speeds up to 150 Meters / Minute.

  • The pneumatic and electric pump fits all container sizes.

2100-BOS Collar, Fits Cable sizes from: 0.125" (3.2mm) to 1.69" (43.0mm)

For ROV & Oceanographic Research operations, there are air jets built in the collar to remove the sea water prior to lubrication.

1400 Collar

Corelube - wire rope lubricator 1400-BOS collar

Patent Pending

1400-BOS Collar, Fits Cable sizes from: 0.125" (3.2mm) to 1.69" (43.0mm)

Designed to be installed between tight narrow spaced wire ropes. 


The CORELUBE BOS systems can evenly apply a light lubricant coating, to a heavy lubricant coating.

wire rope lubrication

  Medium Coating  

wire rope lubrication

  Heavy Coating  

3100 Collar

wire rope lubrication 3100-BOS collar

The wire ropes shown above were coated with the same transitional lubricant.

Note: The two different coating thicknesses using the same BOS lubricator system.

3100-BOS Collar: Fits cables from:

0.47" (12.0mm) to 3.0" (77.0mm)

Scroll across to view more videos

bottom of page