(1) 1500 Ser. System is a super penetrating, cleaning oiling machine. Designed to be used by cable mfg. or cable shops.

1500 Ser. Housing open.

Aluminum Mounting Arm for the 800 Ser. CoreLube housing.

(4) Skid Unit Mounting Arm for the 800 Ser. housing.

Skid Unit System for wireline OH / CH operations.

Aluminum Cart for the 950 Ser. System.

Flow chart of (4) 850 Ser. housings working together.

(8) Guide Roller Cart System, used for oiling & cleaning cables close to the ground.

(9) 850 Ser. (1) housing is used for fresh water rinsing of the cable & the other housing is used for oiling & cleaning.

Power Brush Unit with (2) 800/850 housings. Used to clean wire line or EM cables.

Sheave mounting arm option for the 850 Ser. housing.

Pump option for the 850 & 950 Ser. systems. ( 5:1 Ratio Pump )

Pump option for the 850 & 950 Ser. systems. ( 3:1 Ratio Pump )

Pump control manifold option to operate (3) 850 or 950 Ser. systems together. ( 3:1 Ratio Pump )

Small pump option for the 850 Ser. system.

(16) Wire rope arm type spray system. ( Manually Operated )

Timer controlled wire rope or chain spray oiler.

(18) Auto controlled atomizing spray system for cranes.

Air Wiper for removing sea water ( Low air consumption design )

(20) Large Air Wiper Unit for removing water & mud from the cable.

Large Air Wiper Unit shown open.

(22) Hot water pressure washer option, for use with the 850 & 950 Ser. systems.

Large container option for the 850 or 950 Ser. systems.

Remotely controlled cable climbing machine designed for crawling up communication tower guide wires.

Custom cases for all systems.