| CoreLube Equipment |
| WIRE ROPE & EM CABLE LUBRICATION / CLEANING EQUIPMENT SPECIALISTS |
|
|
|
|
| CoreLube Equipment |
| WIRE ROPE & EM CABLE LUBRICATION / CLEANING EQUIPMENT SPECIALISTS |
|
|
|
|
AUTO SPRAY OILING SYSTEM
Note: You will need the Acrobat Reader to view the PDF documents.
|
Computer Controlled, Operates Unattended Air Dries & Oils in One Pass |
|
The Automatic Spray System is designed to make the task of oiling EM cables effortless. |
|
FEATURES
> The unit can be removed & remounted quickly or left permanently mounted. > Oils the cable without operator intervention. > Operates drip free. > Air dries the cable
prior to oiling. > Easy to operate control
panel. > Self cleaning nozzles > Max. cable oiling speed
250’/Min. > Accommodates cable sizes from:
0 .500”
- 1.800” Dia. > Approximate Oil Consumption:
|
 |
To protect the outer & inner wires from corrosion, frequent oil applications is required.
The Automatic EM Cable Lubrication Spray System is designed to oil frequently.
The preferable mode of operation is to oil the cable as it is being wound back onto the drum.
The cable is air wiped first before the oil is applied.
|
The oil volume applied to the cable is controlled
automatically The Air Wiper is also turned on & off automatically. |
  |
The
high efficiency air wiper is
shown in orange.
The air wiper uses amplification technology which produces 50 times the air volume supplied to it.
|
Specifications: > The Fiberglass Control Panel is NEMA 4X rated. > Pump is NEMA 4X rated. > All Fittings are brass & stainless steel. > All Electrical Quick Connectors are watertight. > Hose Connectors air & oil are swivel type.
Power & Air Requirements: > 115 VAC, 50/60 Hz > Max. Air Supply Pressure - 120 PSI > Min. Air Supply – 50 PSI @20 CFM |
|
Ph: 403-529-9645 Fax: 403-527-1369
